Citation: | Ihatanderson A. Silva, Ana Luiza Lima, Tais Gratieri, Guilherme M. Gelfuso, Livia L. Sa-Barreto, Marcilio Cunha-Filho. Compatibility and stability studies involving polymers used in fused deposition modeling 3D printing of medicines[J]. Journal of Pharmaceutical Analysis, 2022, 12(3): 424-435. doi: 10.1016/j.jpha.2021.09.010 |
I. Alves-Silva, L.C.L. Sa-Barreto, E.M. Lima, et al., Preformulation studies of itraconazole associated with benznidazole and pharmaceutical excipients, Thermochim. Acta. 575(2014)29-33
|
M.K. Trivedi, N. Dixit, P. Panda, et al., In-depth investigation on physicochemical and thermal properties of magnesium (II) gluconate using spectroscopic and thermoanalytical techniques, J. Pharm. Anal. 7(2017)332-337
|
A. Talvani, M.T. Bahia, L.C.L. de Sa-Barreto, et al., Carvedilol:decomposition kinetics and compatibility with pharmaceutical excipients, J. Therm. Anal. Calorim. 115(2014)2501-2506
|
Food and Drug Administration, reportPharmaceutical Development Report Example QbD for IR Generic Drugs, Module 3 Quality 3.2.P.2 Pharmaceutical Development. https://www.fda.gov/files/drugs/published/quality-by-design-% 28QbD% 29-for-an-immediate-release.pdf, 2012(accessed 14 July 2021)
|
R. Ferreira-Nunes, T. Gratieri, G.M. Gelfuso, et al., Mixture design applied in compatibility studies of catechin and lipid compounds, J. Pharm. Biomed. Anal. 149(2018)612-617
|
B. Rojek, B. Suchacz, M. Wesolowski, Artificial neural networks as a supporting tool for compatibility study based on thermogravimetric data, Thermochim. Acta 659(2018)222-231
|
F.Q. Pires, L.A. Pinho, D.O. Freire, et al., Thermal analysis used to guide the production of thymol and Lippia origanoides essential oil inclusion complexes with cyclodextrin, J. Therm. Anal. Calorim. 137(2019)543-553
|
E.M. Materon, A. Wong, T.A. Freitas, et al., A sensitive electrochemical detection of metronidazole in synthetic serum and urine samples using low-cost screen-printed electrodes modified with reduced graphene oxide and C60, J. Pharm. Anal.(2021)
|
A. Awad, F. Fina, A. Goyanes, et al., Advances in powder bed fusion 3D printing in drug delivery and healthcare, Adv. Drug Deliv. Rev. 174(2021)406-424
|
M.D. Sarker, S. Naghieh, N.K. Sharma, et al., 3D biofabrication of vascular networks for tissue regeneration:a report on recent advances, J. Pharm. Anal. 8(2018)277-296
|
S.J. Trenfield, A. Awad, C.M. Madla, et al., Shaping the future:recent advances of 3D printing in drug delivery and healthcare, Expert Opin. Drug Deliv. 16(2019)1081-1094
|
F. Fina, A. Goyanes, M. Rowland, et al., 3D printing of tunable zero-order release printlets, Polymers (Basel)12(2020) E1769
|
S. Ayyoubi, J.R. Cerda, R. Fernandez-Garcia, et al., 3D printed spherical mini-tablets:Geometry versus composition effects in controlling dissolution from personalised solid dosage forms, Int. J. Pharm. 597(2021)120336
|
V.M. Vaz, L. Kumar, 3D printing as a promising tool in personalized medicine, AAPS PharmSciTech 22(2021)49
|
M. Cunha-Filho, M.R. Araujo, G.M. Gelfuso, et al., FDM 3D printing of modified drug-delivery systems using hot melt extrusion:a new approach for individualized therapy, Ther. Deliv. 8(2017)957-966
|
H. Oblom, J.X. Zhang, M. Pimparade, et al., 3D-printed isoniazid tablets for the treatment and prevention of tuberculosis-personalized dosing and drug release, AAPS PharmSciTech 20(2019)52
|
F.Q. Pires, I. Alves-Silva, L.A.G. Pinho, et al., Predictive models of FDM 3D printing using experimental design based on pharmaceutical requirements for tablet production, Int. J. Pharm. 588(2020)119728
|
A. Goyanes, A.B. Buanz, G.B. Hatton, et al., 3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets, Eur. J. Pharm. Biopharm. 89(2015)157-162
|
K. Ilyes, N.K. Kovacs, A. Balogh, et al., The applicability of pharmaceutical polymeric blends for the fused deposition modelling (FDM)3D technique:Material considerations-printability-process modulation, with consecutive effects on in vitro release, stability and degradation, Eur. J. Pharm. Sci. 129(2019)110-123
|
A. Goyanes, H. Chang, D. Sedough, et al., Fabrication of controlled-release budesonide tablets via desktop (FDM)3D printing, Int. J. Pharm. 496(2015)414-420
|
W. Kempin, V. Domsta, I. Brecht, et al., Development of a dual extrusion printing technique for an acid-and thermo-labile drug, Eur. J. Pharm. Sci. 123(2018)191-198
|
I. El Aita, J. Breitkreutz, J. Quodbach, On-demand manufacturing of immediate release levetiracetam tablets using pressure-assisted microsyringe printing, Eur. J. Pharm. Biopharm. 134(2019)29-36
|
G. Matijasic, M. Gretic, J. Vincic, et al., Design and 3D printing of multi-compartmental PVA capsules for drug delivery, J. Drug Deliv. Sci. Technol. 52(2019)677-686
|
A.Q. Low, J. Parmentier, Y.M. Khong, et al., Effect of type and ratio of solubilising polymer on characteristics of hot-melt extruded orodispersible films, Int. J. Pharm. 455(2013)138-147
|
M. Sadia, B. Arafat, W. Ahmed, et al., Channelled tablets:an innovative approach to accelerating drug release from 3D printed tablets, J. Control. Release 269(2018)355-363
|
F. Dores, M. Kuzminska, C. Soares, et al., Temperature and solvent facilitated extrusion based 3D printing for pharmaceuticals, Eur. J. Pharm. Sci. 152(2020)105430
|
J.X. Zhang, X. Feng, H. Patil, et al., Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets, Int. J. Pharm. 519(2017)186-197.]
|
T.C. Okwuosa, C. Soares, V. Gollwitzer, et al., On demand manufacturing of patient-specific liquid capsules via co-ordinated 3D printing and liquid dispensing, Eur. J. Pharm. Sci. 118(2018)134-143
|
A. Melocchi, G. Loreti, M.D. Del Curto, et al., Evaluation of hot-melt extrusion and injection molding for continuous manufacturing of immediate-release tablets, J. Pharm. Sci. 104(2015)1971-1980
|
D.M. Smith, Y. Kapoor, G.R. Klinzing, et al., Pharmaceutical 3D printing:Design and qualification of a single step print and fill capsule, Int. J. Pharm. 544(2018)21-30
|
L.F.B. Malaquias, H.L. Schulte, J.A. Chaker, et al., Hot melt extrudates formulated using design space:one simple process for both palatability and dissolution rate improvement, J. Pharm. Sci. 107(2018)286-296
|
G. Kollamaram, D.M. Croker, G.M. Walker, et al., Low temperature fused deposition modeling (FDM)3D printing of thermolabile drugs, Int. J. Pharm. 545(2018)144-152
|
K. Klimova, J. Leitner, DSC study and phase diagrams calculation of binary systems of paracetamol, Thermochim. Acta 550(2012)59-64
|
A.L. Lima, L.A.G. Pinho, J.A. Chaker, et al., Hot-melt extrusion as an advantageous technology to obtain effervescent drug products, Pharmaceutics 12(2020)779
|
E. Villicana-Molina, E. Pacheco-Contreras, E.A. Aguilar-Reyes, et al., Pectin and chitosan microsphere preparation via a water/oil emulsion and solvent evaporation method for drug delivery, Int. J. Polym. Mater. Polym. Biomater. 69(2020)467-475
|
M.D. Phale, P.D. Hamrapurkar, Optimization and establishment of a validated stability-indicating HPLC method for study of the stress degradation behavior of metoprolol succinate, J. AOAC Int. 93(2010)911-916
|
B. Marciniec, M. Ogrodowczyk, B. Czajka, et al., The influence of radiation sterilisation on some β-blockers in the solid state, Thermochim. Acta 514(2011)10-15
|
R.M. Borkar, B. Raju, R. Srinivas, et al., Identification and characterization of stressed degradation products of metoprolol using LC/Q-TOF-ESI-MS/MS and MSn experiments, Biomed. Chromatogr. 26(2012)720-736
|
Y. Ikeuchi-Takahashi, S. Ito, A. Itokawa, et al., Preparation and evaluation of orally disintegrating tablets containing taste masked microparticles of acetaminophen, Pharmazie 75(2020)2-6
|
M.A. Alhnan, A.W. Basit, In-process crystallization of acidic drugs in acrylic microparticle systems:influence of physical factors and drug-polymer interactions, J. Pharm. Sci. 100(2011)3284-3293
|
R. Pezzoli, J.G. Lyons, N. Gately, et al., Stability studies of hot-melt extruded ternary solid dispersions of poorly-water soluble indomethacin with poly (vinyl pyrrolidone-co-vinyl acetate) and polyethylene oxide, J. Drug Deliv. Sci. Technol. 52(2019)248-254
|
G.G.G. de Oliveira, A. Feitosa, K. Loureiro, et al., Compatibility study of paracetamol, chlorpheniramine maleate and phenylephrine hydrochloride in physical mixtures, Saudi Pharm. J. 25(2017)99-103
|
G. Verstraete, W. De Jaeghere, J. Vercruysse, et al., The use of partially hydrolysed polyvinyl alcohol for the production of high drug-loaded sustained release pellets via extrusion-spheronisation and coating:In vitro and in vivo evaluation, Int. J. Pharm. 517(2017)88-95
|
K.L. O'Donnell, G.S. Oporto-Velasquez, N. Comolli, Evaluation of acetaminophen release from biodegradable poly (vinyl alcohol)(PVA) and nanocellulose films using a multiphase release mechanism, Nanomaterials (Basel)10(2020) E301
|
M.K. Lai, R.C. Tsiang, Encapsulating acetaminophen into poly (L-lactide) microcapsules by solvent-evaporation technique in an O/W emulsion, J. Microencapsul. 21(2004)307-316
|
Y.S. Yang, A. Gupta, A.S. Carlin, et al., Comparative stability of repackaged metoprolol tartrate tablets, Int. J. Pharm. 385(2010)92-97
|
J. Varshosaz, H. Faghihian, K. Rastgoo, Preparation and characterization of metoprolol controlled-release solid dispersions, Drug Deliv. 13(2006)295-302
|
K.P. Sawant, R. Fule, M. Maniruzzaman, et al., Extended release delivery system of metoprolol succinate using hot-melt extrusion:effect of release modifier on methacrylic acid copolymer, Drug Deliv. Transl. Res. 8(2018)1679-1693
|
S.M. Alshahrani, W.L. Lu, J.B. Park, et al., Stability-enhanced hot-melt extruded amorphous solid dispersions via combinations of Soluplus® and HPMCAS-HF, AAPS PharmSciTech 16(2015)824-834
|
A.B. Albadarin, C.B. Potter, M.T. Davis, et al., Development of stability-enhanced ternary solid dispersions via combinations of HPMCP and Soluplus® processed by hot melt extrusion, Int. J. Pharm. 532(2017)603-611
|